- Manuals
- Brands
- Mainstays Manuals
- Indoor Furnishing
- MS62025004001
- Manual
Adjustable desk
Hide thumbs
Table of Contents
-
Special Note
-
Parts Identification
-
Important Notice
-
Quality Guarantee
-
Identificación de Partes
-
Nota Importante
-
Mantenimiento y Cuidados
Advertisem*nt
Available languages
- EN
Available languages
- ENGLISH, page 1
Quick Links
- 1 Parts Identification
- Download this manual
Optional L-shaped Corner Desk
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Adjustable Desk
Model # MS62025004001
ADULT ASSEMBLY REQUIRED
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2022-05-17
866-942-5362
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED: /
Optional Extra Long Desk
/
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Mainstays MS62025004001
-
Indoor Furnishing Mainstays MS1209200152 Assembly Instructions Manual
(11 pages)
-
Indoor Furnishing Mainstays CONRAD Series Assembly Instructions Manual
Coffee table (16 pages)
-
Indoor Furnishing Mainstays MS18-D2-1011-08 Manual
4 shelf tower book shelf (16 pages)
-
Indoor Furnishing Mainstays MS18-D2-1011-05 Manual
Metal rolling student desk (16 pages)
-
Indoor Furnishing Mainstays MS18-D1-1007-16 Assembly Instructions Manual
Bennett coffee table (18 pages)
-
Indoor Furnishing Mainstays Conrad MS16-D4-1007-05 Assembly Instructions Manual
(16 pages)
-
Indoor Furnishing Mainstays MSS129900298080 Assembly And Care Manual
Mainstays stanton 4-piece patio furniture conversation set (6 pages)
-
Indoor Furnishing Mainstays FULTON MS16-D4-1007-22 Assembly Instructions Manual
Sofa bed (10 pages)
-
Indoor Furnishing Mainstays GORDON MS18-D1-1007-46 Assembly Instructions Manual
(14 pages)
-
Indoor Furnishing Mainstays MSW-10003 Instruction Booklet
Gaming desk (20 pages)
-
Indoor Furnishing Mainstays BENNETT MS18-D1-1007-13 Assembly Instructions Manual
Bookcase (22 pages)
-
Indoor Furnishing Mainstays MS17-D4-1007-10 Assembly Instructions Manual
Loop storage ottoman (12 pages)
-
Indoor Furnishing Mainstays MS16-D4-1007-14 Assembly Instructions Manual
Modular ottoman (8 pages)
-
Indoor Furnishing Mainstays MS95-010-103-02 Manual
5 pc dining set (28 pages)
-
Indoor Furnishing Mainstays MS18-03-1011-01 Manual
End table (16 pages)
-
Indoor Furnishing Mainstays MS3336132978 Instruction Booklet
Modern dining set (16 pages)
Summary of Contents for Mainstays MS62025004001
- Page 1 LOT NUMBER: DATE PURCHASED: / Adjustable Desk Model # MS62025004001 Optional Extra Long Desk Optional L-shaped Corner Desk ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased.
-
Page 2: Special Note
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Adjustable Desk MODEL # MS62025004001 MAXIMUM LOAD 90.8 kg / 200 lb. MAXIMUM LOAD 22.7 kg / 50 lb. - Page 3 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Return Top Panel (Qty. 1) B- Middle Tier Top Panel (Qty. 1) C- Desk Top Panel (Qty. 1) D- Fixed Shelf (Qty.
- Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. K- Return Front Stretcher (Qty. 1) L- Return Back Stretcher (Qty. 1) M- Return Bottom Stretcher (Qty. 1) N- X Crossbar (Qty.
-
Page 5: Parts Identification
Parts Identification Not actual size This image may differ depending on model... - Page 6 Assembly Instructions ② x 6 NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the assembly easier. 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch.
- Page 7 Assembly Instructions 3. Fasten the metal bracket on Desk Front Stretcher (H) to the Side Frame (E) with two 15mm Bolts (1).
- Page 8 Assembly Instructions ② x 4 4. Align and attach two Fixed Shelves (D) to the lower rails of Middle Tier Right Frame (G) with four 30mm Bolts (2).
- Page 9 Assembly Instructions ② x 4 5. Orient and attach the Middle Tier Left Frame (F) to the left side of both Fixed Shelves (D) with four 30mm Bolts (2).
- Page 10 Assembly Instructions ② x 3 6. Orient and attach the Return Stretchers (K, L and M) to the other Side Frame (E) with three 30mm Bolts (2) as shown.
- Page 11 Assembly Instructions ① x 2 7. Fasten the metal bracket on Return Front Stretcher (K) to the Side Frame (E) with two 15mm Bolts (1).
-
Page 12: Important Notice
IMPORTANT NOTICE The desk is designed to be revertible. Consider the location you prefer to place the desk relative to your room, two configurations can be available. ① x 1 ② x 2 8. Depending on your room you can choose the preferred configuration above which suits your needs. Attach the assembled Return Stretchers (K, L and M) to the previous assembly with one 15 mm Bolt (1) and two 30 mm Bolts (2) as shown. - Page 13 Assembly Instructions ② x 20 9. Properly position the Top Panels (A, B and C) onto the previous assembly. Make sure that the mounting holes overlap the threaded inserts underneath the tops and the grommets are located at back side. Fasten the Top Panels (A, B and C) into place with twenty 30mm Bolts (2) .
- Page 14 Assembly Instructions ③ x 8 10. Align and attach two X Crossbars (N) to the back of the assembled unit with eight 8mm Bolts (3). Tighten the bolts with a Phillips screwdriver.
- Page 15 Assembly Instructions 11. Now, go back and securely tighten all the bolts. Make sure all the parts are tight and there are no gaps between the parts. This will keep the unit square. 12. If necessary, adjust the pre-attached floor levelers at the bottom of all Side Frames to level the unit.
-
Page 16: Quality Guarantee
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. ... - Page 17 NÚMERO de LOTE: FECHA de COMPRA: / Escritorio ajustable Modelo # MS62025004001 Escritorio extra largo opcional Escritorio esquina L opcional ENSAMBLE REQUERIDO POR ADULTO Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a la tienda donde lo compro.
- Page 18 M Á X I M O P E S O R E C O M E N D A D O FABRICANTE: Whalen Furniture Manufacturing CATALOGO: Escritorio ajustable MODELO # MS62025004001 CARGA MÁXIMA 90.8 kg / 200 lb. CARGA MÁXIMA 22.7 kg / 50 lb.
- Page 19 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. A- Panel superior del complemento (Cant. 1) B- Panel superior de la parte media (Cant. 1) C- Panel superior del escritorio (Cant.
- Page 20 Lista de partes y material de ferretería Por favor lea completamente las instrucciones y verifique que estén todas las partes y partes de ferretería antes de iniciar el ensamblado. K- Soporte frontal del complemento (Cant. 1) L- Soporte posterior del complemento (Cant. 1) M- Soporte inferior del complemento (Cant.
-
Page 21: Identificación De Partes
Identificación de partes Medida no actual Esta figura puede diferir dependiendo del modelo... - Page 22 Instructivo de ensamble ② x 6 NOTA: Por favor no apriete completamente todos los pernos, hasta que termine con el ensamble de las partes. Después asegúrese de apretar todos los pernos. Esto hará el ensamble más fácil. 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. Ensamblar la unidad en un piso alfombrado o en el cartón vacío para evitar rasguños.
- Page 23 Instructivo de ensamble 3. Sujetar el soporte de metal en el soporte frontal del escritorio (H) al marco lateral (E) con 2 pernos de 15mm (1).
- Page 24 Instructivo de ensamble ② x 4 4. Alinear y adjuntar 2 repisas fijas (D) a los rieles inferiores del marco derecho de la parte media (G) con 4 pernos de 30mm (2).
- Page 25 Instructivo de ensamble ② x 4 5. Orientar y adjuntar el marco izquierdo de la parte media (F) a la parte izquierda de ambas repisas fijas (D) con 4 pernos de 30mm (2).
- Page 26 Instructivo de ensamble ② x 3 6. Orientar y sujetar los soportes del complemento (K, L y M) al otro marco lateral (E) con 3 pernos de 30mm (2) como se muestra.
- Page 27 Instructivo de ensamble ① x 2 7. Sujetar el soporte de metal en el soporte frontal del complemento (K) al marco lateral (E) con 2 pernos de 15mm (1).
-
Page 28: Nota Importante
NOTA IMPORTANTE El escritorio esta diseñado para ser reversible. Considerar el lugar donde prefiera poner su escritorio en relación con su cuarto, dos configuraciones están disponibles. ① x 1 ② x 2 8. Dependiendo de su cuarto usted puede elegir la configuración preferida que satisfa*ga sus necesidades. Adjuntar los soportes del complemento ensamblados (K, L y M) al ensamble previo con un perno de 15 mm (1) y 2 pernos de 30 mm (2) como se muestra. - Page 29 Instructivo de ensamble ② x 20 9. Posicionar apropiadamente los paneles superiores (A, B y C) sobre el ensamble previo. Asegurar de que los agujeros de montaje sobrelapen los insertos roscados abajo de las partes superiores y los ojales estén en la parte posterior.
- Page 30 Instructivo de ensamble ③ x 8 10. Alinear y adjuntar 2 soportes X (N) a la parte posterior de la unidad ensamblada con 8 pernos de 8 mm (3). Apretar los pernos con el desarmador estrella.
- Page 31 Instructivo de ensamble 11. Ahora, volver y apretar todos los pernos. Asegurar que todas las partes estén apretadas y de que no hay huecos entre las partes. Esto ayudara a mantener la unidad cuadrada. 12. Si fuera necesario, ajustar los niveladores de piso pre-adjuntados en la parte inferior de todos los marcos laterales para nivelar la unidad.
-
Page 32: Mantenimiento Y Cuidados
Mantenimiento y Cuidados Use una toalla suave y limpia para evitar daños y rayaduras. Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruébela en un área que no sea visible para revisar su funcionamiento. ...
